Experimental Rostoc Compatibility with Santoker R Master Series WiFi
Does Rostoc support the Santoker R Master Series WiFi?
Rostoc lists experimental compatibility for the Santoker R Master Series WiFi via Wi-Fi or Bluetooth. This Machine can be connected for real-time roast logging, Curve recording, and roast analysis. Confirm the setup before relying on it for production logging.
Connection setup
The Santoker R Master Series WiFi connects to Rostoc via Wi-Fi or Bluetooth.Connection: Wi-Fi / Bluetooth.
Setup steps
- Connect the roaster using the connection shown above: Wi-Fi / Bluetooth.
- For Wi-Fi, keep the roaster and computer on the same local network. For Bluetooth, enable Bluetooth, keep the roaster close to the computer, and pair it if required.
- Open Rostoc and go to Settings → Machines.
- Click + Add Machine and choose Browse Catalogue.
- Find "Santoker R Master Series WiFi" in the catalog and click Add.
- Back on the main screen, click Use for the Machine if needed, then verify the connection settings if prompted.
- Click Connect to begin logging.
Troubleshooting
- Rostoc cannot connect
- For Wi-Fi, confirm the roaster and computer are on the same local network. For Bluetooth, confirm the roaster is paired and close to the computer.
- Device disappears
- Restart the roaster connection mode, then reconnect from Rostoc. Close other roasting software that may already be connected.
Machine controls
Data logging only
Rostoc can read this machine for roast logging, but does not currently expose machine controls for it.
Learn how availability, command results, and safety checks work in Machine controls.
Specifications
| Roaster type | Drum |
|---|---|
| Heating | Unknown |
| Setup type | santoker_binary |
| Connection | Wi-Fi / Bluetooth |
Data streams
When connected, Rostoc reads the following data from this machine:
- Airflowpercent
- Bean Tempcelsius
- Drumpercent
- Env Tempcelsius
- Powerpercent