Experimental Rostoc Compatibility with Santoker R Master Series BT
Does Rostoc support the Santoker R Master Series BT?
Rostoc lists experimental compatibility for the Santoker R Master Series BT via Bluetooth. This Machine can be connected for real-time roast logging, Curve recording, and roast analysis. Confirm the setup before relying on it for production logging.
Connection setup
The Santoker R Master Series BT connects to Rostoc via Bluetooth.Connection: Bluetooth.
Setup steps
- Enable Bluetooth on your computer and allow Rostoc to use Bluetooth if your operating system asks.
- Power on the roaster, keep it close to the computer, and put it in pairing mode if required.
- Open Rostoc and go to Settings → Machines.
- Click + Add Machine and choose Browse Catalogue.
- Find "Santoker R Master Series BT" in the catalog and click Add.
- Back on the main screen, click Use for the Machine if needed, then choose it from the discovered Bluetooth devices.
- Click Connect to start logging.
Troubleshooting
- Device not found
- Ensure the roaster is in pairing mode and within range. Restart Bluetooth on your computer.
- Permission blocked
- On macOS or Windows, check that Rostoc is allowed to use Bluetooth. Remove the old pairing and pair the machine again if discovery is stale.
- Frequent disconnections
- Move closer to the roaster. Avoid interference from other Bluetooth or Wi-Fi devices.
Machine controls
Data logging only
Rostoc can read this machine for roast logging, but does not currently expose machine controls for it.
Learn how availability, command results, and safety checks work in Machine controls.
Specifications
| Roaster type | Drum |
|---|---|
| Heating | Unknown |
| Setup type | santoker_ble_binary |
| Connection | Bluetooth |
Data streams
When connected, Rostoc reads the following data from this machine:
- Airflowpercent
- Bean Tempcelsius
- Drumpercent
- Env Tempcelsius
- Powerpercent