NOR Coffee Roaster NOR A Series Machine Controls & Modbus RTU Setup

1. Machines/
2. NOR Coffee Roaster/
3. NOR A Series

Supportedby NOR Coffee Roaster

Does Rostoc support the NOR Coffee Roaster NOR A Series?

Yes - NOR Coffee Roaster NOR A Series is supported by Rostoc via Modbus RTU over RS-485 serial (9600 baud). This Machine can be connected for real-time roast logging, Curve recording, and roast analysis. For eligible accounts, Rostoc can also control the functions listed below.

See it with this machineDownload Rostoc

Connection setup

The NOR Coffee Roaster NOR A Series connects to Rostoc via Modbus RTU over RS-485 serial (9600 baud).Connection: RS-485 Serial.

Setup steps

1. Connect a USB-to-RS-485 adapter to your computer, then connect the adapter to the machine RS-485 port or terminals.
2. Match the A/B or +/− wiring to the machine manual. If the adapter has ground, connect it only when the manual recommends it.
3. Install the adapter driver if your operating system requires it.
4. Open Rostoc and go to Settings → Machines.
5. Click + Add Machine and choose Browse Catalogue.
6. Find "NOR Coffee Roaster NOR A Series" in the catalog and click Add.
7. Back on the main screen, click Use for the Machine if needed, then choose the serial port assigned to the adapter. The baud rate, serial settings, and unit ID are pre-filled from the catalog.
8. Close other roasting software that may be using the same adapter.
9. Click Connect to start reading data.

Troubleshooting

Serial port not detected

Ensure the USB-to-RS-485 adapter driver is installed. Try a different USB port. On macOS, check System Information > USB.

No response from roaster

Verify the baud rate and parity settings match the roaster's configuration. Check RS-485 wiring polarity (A/B or +/−).

CRC errors in log

Reduce cable length or add a termination resistor. Ensure no other device shares the RS-485 bus.

Another app is open

Close other roasting software that may be using the same serial adapter before connecting in Rostoc.

Machine controls

Machine controls available

Eligible accounts can send the following commands while this Machine is connected and selected. Availability does not certify every control on the physical Machine; test safely before production use.

Connection: NOR NOR A Series · RS-485 Serial (USB)

Machine-specific control previewNOR A Series

Interactive documentation demo

NOR NOR A Series · RS-485 Serial (USB)

Adjustable controls

6

Damper

6

Burner

Switches and actions

RESETCoolingLamp

Documentation demo only. Values are illustrative; this preview never connects to a Machine or sends a command.

Control	How it works	Rostoc command values	Result check
RESETAcknowledgement	Action buttonClick once	Sends one action	Connection acknowledgement; verify on the Machine
CoolingMomentary action	Action buttonClick once	Sends one action	Connection acknowledgement; verify on the Machine
DamperOutput	SliderAdjust, then release	1–10	Connection acknowledgement; verify on the Machine
BurnerOutput	SliderAdjust, then release	1–10	Connection acknowledgement; verify on the Machine
LampState	Action buttonClick once	Sends one action	Connection acknowledgement; verify on the Machine

These are Rostoc's accepted command values for this connection, not certified safe operating limits. Follow the Machine manufacturer's limits and procedures.

Before use

Keep the physical controls and emergency stop accessible, never leave the roaster unattended, and do not run another control application at the same time.

Learn how availability, command results, and safety checks work in Machine controls. To move between available controls without a mouse, see Keyboard shortcuts.

Specifications

Roaster type	Drum
Heating	Unknown
Setup type	Modbus
Connection	RS-485 Serial (USB)

Data streams

When connected, Rostoc reads the following data from this machine:

• Bean Tempcelsius
• Env Tempcelsius

Other NOR Coffee Roaster roasters

• NOR Extension MODBUSSupported
• NOR N SeriesSupported