Experimental Wuhan Kaleido Technology Co. Kaleido Serial Machine Controls & Rostoc Compatibility

1. Machines/
2. Wuhan Kaleido Technology Co./
3. Kaleido Serial

Experimentalby Wuhan Kaleido Technology Co.

Does Rostoc support the Wuhan Kaleido Technology Co. Kaleido Serial?

Rostoc lists experimental compatibility for the Wuhan Kaleido Technology Co. Kaleido Serial via USB serial (57600 baud). This 0.1 kg drum roaster can be connected for real-time roast logging, Curve recording, and roast analysis. For eligible accounts, Rostoc can also control the functions listed below. Confirm the setup before relying on it for production logging.

See it with this machineDownload Rostoc

Connection setup

The Wuhan Kaleido Technology Co. Kaleido Serial connects to Rostoc via USB serial (57600 baud).Connection: USB Serial.

Setup steps

1. Connect the roaster to your computer with a data-capable USB cable.
2. Install the manufacturer's USB or serial driver if your operating system requires it.
3. Open Rostoc and go to Settings → Machines.
4. Click + Add Machine and choose Browse Catalogue.
5. Find "Wuhan Kaleido Technology Co. Kaleido Serial" in the catalog and click Add.
6. Back on the main screen, click Use for the Machine if needed, then choose the serial port assigned to the roaster. The baud rate and serial settings are pre-filled from the catalog.
7. Close other roasting software that may be using the same USB or serial port.
8. Click Connect to begin logging.

Troubleshooting

Serial port not detected

Try another data-capable USB cable and port. Install the manufacturer driver if your operating system asks for one.

Wrong serial port selected

Unplug the roaster, note which ports are listed, replug, and select the new one.

Data stream is empty

Confirm the roaster is powered on and out of startup or standby. Some machines only send data in specific modes.

Machine controls

Machine controls available

Eligible accounts can send the following commands while this Machine is connected and selected. Availability does not certify every control on the physical Machine; test safely before production use.

Connection: Kaleido Kaleido Serial · USB Serial

Machine-specific control previewKaleido Serial

Interactive documentation demo

Kaleido Kaleido Serial · USB Serial

Adjustable controls

50

%Heater power

50

%Fan

50

%Drum

Switches and actions

Auto Heating (PID) · OffHeating (on/off) · Off

Documentation demo only. Values are illustrative; this preview never connects to a Machine or sends a command.

Control	How it works	Rostoc command values	Result check
Heater powerOutput	SliderAdjust, then release	0–100 %	Connection acknowledgement; verify on the Machine
FanOutput	SliderAdjust, then release	0–100 %	Connection acknowledgement; verify on the Machine
DrumOutput	SliderAdjust, then release	0–100 %	Connection acknowledgement; verify on the Machine
Auto Heating (PID)Output	On/off switchSwitch on or off	Off / On	Connection acknowledgement; verify on the Machine
Heating (on/off)Output	On/off switchSwitch on or off	Off / On	Connection acknowledgement; verify on the Machine

These are Rostoc's accepted command values for this connection, not certified safe operating limits. Follow the Machine manufacturer's limits and procedures.

Before use

Keep the physical controls and emergency stop accessible, never leave the roaster unattended, and do not run another control application at the same time.

Learn how availability, command results, and safety checks work in Machine controls. To move between available controls without a mouse, see Keyboard shortcuts.

Specifications

Roaster type	Drum
Heating	Electric
Capacity	0.1 kg
Setup type	Kaleido
Connection	USB Serial

Data streams

When connected, Rostoc reads the following data from this machine:

• Ambient Tempcelsius
• Auto Heating
• Bean Tempcelsius
• Drumpercent
• Env Tempcelsius
• Fanpercent
• Heaterpercent
• Heating Status
• Set Valuecelsius

Other Wuhan Kaleido Technology Co. roasters

• Kaleido LegacyExperimental
• Kaleido NetworkExperimental