Connection Status
Summary
When readings stop, Rostoc says why: not responding (the machine stopped answering; Rostoc keeps trying), then connection lost — reconnecting, then could not reconnect if every attempt fails. A machine switched off after roasting goes through the same steps. That is expected. An Aillio Bullet is the exception: Rostoc never gives up on it. It shows "Your … is off or unplugged. Rostoc reconnects when it is back." and connects again when the Bullet comes back.
What each one means:
- Readings greyed out: no new reading has arrived. The last values stay on screen.
- Not responding: the connection is still open, but the machine stopped answering. Rostoc keeps reading, and the readings come back by themselves as soon as it answers.
- Connection lost — reconnecting: the machine stayed silent, or its USB port disappeared, so Rostoc closed the connection and is reconnecting by itself, up to 6 attempts.
- Could not reconnect — connect manually from Machines: every attempt failed. Rostoc stops trying until you press Retry or connect the Machine again.
Steps
- Check that the machine is switched on and that its cable is plugged in at both ends.
- If you switched the machine off after roasting, nothing is wrong. Connect it again from Machines when it is back on.
- If Rostoc says not responding while the machine is on, give it a few seconds. The readings come back by themselves when it answers.
- If the USB cable came out, plug it back in. While Rostoc is still reconnecting, it picks the machine up again by itself.
- If the banner says could not reconnect, check power and the cable, then press Retry or connect the Machine from Machines.
- If it happens again and again during roasts, finish the roast, then click Send Feedback so the team receives Rostoc's recent logs.