Mill City Roasters MCR Digital Control Panel 1200 F: Machine controls e configuração Modbus RTU
O Rostoc é compatível com Mill City Roasters MCR Digital Control Panel 1200 F?
Sim - Mill City Roasters MCR Digital Control Panel 1200 F é compatível com o Rostoc via Modbus RTU over RS-485 serial (19200 baud). Esta máquina pode ser conectada para registro de dados de torra em tempo real, registro da Curve e análise da torra. Em contas elegíveis, o Rostoc também pode controlar as funções listadas abaixo.
Configuração de conexão
Mill City Roasters MCR Digital Control Panel 1200 F se conecta ao Rostoc via Modbus RTU over RS-485 serial (19200 baud).Conexão: RS-485 Serial.
Passos de configuração
- Connect a USB-to-RS-485 adapter to your computer, then connect the adapter to the machine RS-485 port or terminals.
- Match the A/B or +/− wiring to the machine manual. If the adapter has ground, connect it only when the manual recommends it.
- Install the adapter driver if your operating system requires it.
- Open Rostoc and go to Settings → Machines.
- Click + Add Machine and choose Browse Catalogue.
- Find "Mill City Roasters MCR Digital Control Panel 1200 F" in the catalog and click Add.
- Back on the main screen, click Use for the Machine if needed, then choose the serial port assigned to the adapter. The baud rate, serial settings, and unit ID are pre-filled from the catalog.
- Close other roasting software that may be using the same adapter.
- Click Connect to start reading data.
Solução de problemas
- Serial port not detected
- Ensure the USB-to-RS-485 adapter driver is installed. Try a different USB port. On macOS, check System Information > USB.
- No response from roaster
- Verify the baud rate and parity settings match the roaster's configuration. Check RS-485 wiring polarity (A/B or +/−).
- CRC errors in log
- Reduce cable length or add a termination resistor. Ensure no other device shares the RS-485 bus.
- Another app is open
- Close other roasting software that may be using the same serial adapter before connecting in Rostoc.
Controles da máquina
Contas elegíveis podem enviar estes comandos quando a máquina estiver conectada e selecionada. Teste com segurança antes do uso em produção.
Conexão: Mill City Roasters MCR Digital Control Panel 1200 F · RS-485 Serial (USB)
Controles ajustáveis
| Controle | Como funciona | Valores de comando do Rostoc | Verificação do resultado |
|---|---|---|---|
| AirSaída | Controle deslizanteAjustar e soltar | 0–60 Hz | Confirmação da conexão; verifique na máquina |
| DrumSaída | Controle deslizanteAjustar e soltar | 0–60 Hz | Confirmação da conexão; verifique na máquina |
| BurnerSaída | Controle deslizanteAjustar e soltar | 0–350 daPa | Confirmação da conexão; verifique na máquina |
Estes são os valores de comando aceitos pelo Rostoc para esta conexão, não limites operacionais seguros certificados. Siga os limites e procedimentos do fabricante.
Consulte disponibilidade e segurança em Controles da máquina. Para navegar pelos controles sem o mouse, consulte Atalhos de teclado.
Especificações
| Tipo de torrador | Drum |
|---|---|
| Aquecimento | Unknown |
| Tipo de setup | Modbus |
| Conexão | RS-485 Serial (USB) |
Fluxos de dados
Quando conectado, o Rostoc lê os seguintes dados desta máquina:
- Env Tempfahrenheit
- Drum Tempfahrenheit
- Bean Tempfahrenheit
- Inlet Tempfahrenheit
- Burner Setpointpercent
- Drum SpeedHz
- Fan SetpointHz
- GasSV