Kompatibilitas eksperimental Rostoc dengan Santoker R Series USB
Apakah Rostoc mendukung Santoker R Series USB?
Rostoc mencantumkan kompatibilitas eksperimental untuk Santoker R Series USB via USB serial (9600 baud). Mesin ini dapat dihubungkan untuk logging data roasting secara real-time, merekam Curve, dan analisis roasting. Konfirmasi setup sebelum mengandalkannya untuk logging produksi.
Setup koneksi
Santoker R Series USB terhubung ke Rostoc via USB serial (9600 baud).Koneksi: USB Serial.
Langkah setup
- Connect the roaster to your computer with a data-capable USB cable.
- Install the manufacturer's USB or serial driver if your operating system requires it.
- Open Rostoc and go to Settings → Machines.
- Click + Add Machine and choose Browse Catalogue.
- Find "Santoker R Series USB" in the catalog and click Add.
- Back on the main screen, click Use for the Machine if needed, then choose the serial port assigned to the roaster. The baud rate and serial settings are pre-filled from the catalog.
- Close other roasting software that may be using the same USB or serial port.
- Click Connect to begin logging.
Pemecahan masalah
- Serial port not detected
- Try another data-capable USB cable and port. Install the manufacturer driver if your operating system asks for one.
- Wrong serial port selected
- Unplug the roaster, note which ports are listed, replug, and select the new one.
- Data stream is empty
- Confirm the roaster is powered on and out of startup or standby. Some machines only send data in specific modes.
Kontrol mesin
Hanya logging data
Rostoc dapat membaca mesin ini untuk logging roasting, tetapi belum menyediakan kontrol langsung.
Pelajari ketersediaan dan keamanan di Kontrol mesin.
Spesifikasi
| Tipe roaster | Drum |
|---|---|
| Pemanasan | Unknown |
| Tipe setup | CENTER 301 Serial |
| Koneksi | USB Serial |
Aliran data
Saat terhubung, Rostoc membaca data berikut dari mesin ini:
- Bean Tempcelsius
- Env Tempcelsius