Lewati ke konten
RostocRostocRostoc

Nucleus Coffee Tools Link: setup USB Serial dengan Rostoc

Didukungoleh Nucleus Coffee Tools

Apakah Rostoc mendukung Nucleus Coffee Tools Link?

Ya - Nucleus Coffee Tools Link didukung oleh Rostoc via USB serial (9600 baud). Mesin sangrai sample_roaster 0.1 kg ini dapat dihubungkan untuk logging data roasting secara real-time, merekam Curve, dan analisis roasting.

Lihat dengan mesin iniUnduh Rostoc

Setup koneksi

Nucleus Coffee Tools Link terhubung ke Rostoc via USB serial (9600 baud).Koneksi: USB Serial.

Langkah setup

  1. Connect the roaster to your computer with a data-capable USB cable.
  2. Install the manufacturer's USB or serial driver if your operating system requires it.
  3. Open Rostoc and go to Settings → Machines.
  4. Click + Add Machine and choose Browse Catalogue.
  5. Find "Nucleus Coffee Tools Link" in the catalog and click Add.
  6. Back on the main screen, click Use for the Machine if needed, then choose the serial port assigned to the roaster. The baud rate and serial settings are pre-filled from the catalog.
  7. Close other roasting software that may be using the same USB or serial port.
  8. Click Connect to begin logging.

Pemecahan masalah

Serial port not detected
Try another data-capable USB cable and port. Install the manufacturer driver if your operating system asks for one.
Wrong serial port selected
Unplug the roaster, note which ports are listed, replug, and select the new one.
Data stream is empty
Confirm the roaster is powered on and out of startup or standby. Some machines only send data in specific modes.

Kontrol mesin

Hanya logging data

Rostoc dapat membaca mesin ini untuk logging roasting, tetapi belum menyediakan kontrol langsung.

Pelajari ketersediaan dan keamanan di Kontrol mesin.

Spesifikasi

Tipe roastersample_roaster
PemanasanElectric
Kapasitas0.1 kg
Tipe setupUSB serial
KoneksiUSB Serial

Aliran data

Saat terhubung, Rostoc membaca data berikut dari mesin ini:

  • Bean Tempcelsius
  • Fan Speedpercent

Catatan

Measurements are available while the roaster is actively producing Link telemetry. Fan speed uses a provisional linear calibration where 17,000 RPM equals 100%.

Tentang mesin ini

Nucleus Link sample roaster serial telemetry preset.