Kompatibilitas eksperimental Rostoc dengan Diedrich Roasters Diedrich 4-Sensor
Apakah Rostoc mendukung Diedrich Roasters Diedrich 4-Sensor?
Rostoc mencantumkan kompatibilitas eksperimental untuk Diedrich Roasters Diedrich 4-Sensor over USB. Mesin ini dapat dihubungkan untuk logging data roasting secara real-time, merekam Curve, dan analisis roasting. Konfirmasi setup sebelum mengandalkannya untuk logging produksi.
Setup koneksi
Diedrich Roasters Diedrich 4-Sensor terhubung ke Rostoc over USB.Koneksi: USB.
Langkah setup
- Connect the Phidget interface and temperature modules to your computer with a data-capable USB cable.
- Connect the temperature probes to the Phidget module before opening Rostoc.
- Install the Phidget driver or control panel if your operating system requires it.
- Open Rostoc and go to Settings → Machines.
- Click + Add Machine and choose Browse Catalogue.
- Find "Diedrich Roasters Diedrich 4-Sensor" in the catalog and click Add.
- Back on the main screen, click Use for the Machine if needed, then confirm the Phidget device is connected. Rostoc uses the USB device directly; there is no COM port to choose.
- Click Connect to begin logging.
Pemecahan masalah
- USB device not recognized
- Try another data-capable USB cable and port. Confirm the Phidget driver or control panel can see the device.
- No temperature readings
- Check that probes are plugged into the expected Phidget channels and that the sensor type matches the catalog setup.
- Another app is open
- Close other software that may be using the same Phidget device before connecting in Rostoc.
Kontrol mesin
Hanya logging data
Rostoc dapat membaca mesin ini untuk logging roasting, tetapi belum menyediakan kontrol langsung.
Pelajari ketersediaan dan keamanan di Kontrol mesin.
Spesifikasi
| Tipe roaster | Drum |
|---|---|
| Pemanasan | Unknown |
| Tipe setup | Phidget USB |
| Koneksi | USB |
Aliran data
Saat terhubung, Rostoc membaca data berikut dari mesin ini:
- Bean Tempcelsius
- Env Tempcelsius
- Board Tempcelsius
- Inlet Tempcelsius