Kaffelogic Nano 7 USB And First Readings

1. Setup Help/
2. Kaffelogic Nano 7 USB And First Readings

Machine SetupReviewed 2026-06-27

Summary

Kaffelogic Nano 7 connects to Rostoc over supported USB serial setups. If the connection test succeeds, temperature data may not appear until the roast starts.

Steps

1. Use a USB cable that carries data.
2. Connect the Kaffelogic directly to the computer running Rostoc.
3. Power on the machine and wait until it is ready.
4. Close Kaffelogic Studio and other apps using the USB connection.
5. Add Kaffelogic Nano 7 in Rostoc and run Test Connection.
6. Start a short test roast to verify readings.