Titanium TGX roaster setup with Rostoc.

Direct Answer

Rostoc can be tested with the Titanium TGX catalog entry for experimental Phidget USB roast logging.

This page is for the TGX Phidget path. Do not assume every Titanium roaster or every regional configuration is supported unless the exact catalog entry says so.

• Use the Titanium TGX entry in the Rostoc catalog.
• Connect through the expected Phidget USB sensor path.
• Validate the exact probe channels before production use.
• Use normal roaster controls while Rostoc records the roast data.

Covered setup

The TGX setup should be checked as a specific roaster and sensor configuration. Optional probes, regional variations, or custom wiring can change what Rostoc should read.

Existing setup screenshots or a `.aset` file can help support understand the channel map, but the Rostoc entry still needs a hardware validation pass.

• Titanium TGX - experimental Phidget USB logging.
• Other Titanium models - request support unless the catalog lists an exact entry.
• Custom probe layouts - validate labels and readings before saving production records.

Validation checklist

Start with a short validation roast or warm-up session. The goal is to prove live values, stream labels, and saved batch replay.

Do not assume Rostoc can control the roaster from this setup page.

• Install the Phidgets driver if needed.
• Close other applications connected to the Phidget device.
• Add the Titanium TGX entry from the Rostoc catalog.
• Compare Rostoc readings against the roaster display or known probe order.
• Save and reopen a test batch to confirm chart labels and values.

Support boundaries

Contact support if the TGX setup differs from the catalog entry, the channel order is unclear, or the Phidget device does not appear.

Start with the machine compatibility guide, the Titanium catalog page, and the Phidget USB setup docs.

FAQ